Door frame (no transom) Includes glass and closer, one 12 sidelite. Frame is KD (knocked down, requires minor assembly).
Installation instructions are at the bottom of this detail. I will get a rate quote (message if you have a motorline preference).
The frame dimensions are 51 1/2" x 85 3/4". Allowing for shimming, the Rough Opening needed is 52 X 86.We will not be liable for any incidental, indirect, consequential, or damages of any nature arising from the sale of any item after the item has left our facility. All emails are usually answered within 24 hours. Position assembled frame plumb and square in opening. Drill and countersink anchor holes for anchor screws.
Note: Mount all hardware before putting the door frame in the framed opening closer to. Be mounted after everything is installed. Holes should be started 6 from the bottom of each jamb.
Drill at least 3 holes evenly spaced through the glazing pocket of header, they will be concealed by the door stops. Set threshold in bed of sealant or mastic. Shim and secure jambs and header in opening.
Secure the threshold (if supplied) to the floor. Recheck that the shims and anchors are square with the door.
All the gaps between the door and frame should be even. Snap in door stops into the frame pocket.The felt should be facing the door. This item is in the category "Business & Industrial\Building Materials & Supplies\Commercial Doors & Door Hardware\Commercial Doors". The seller is "storefrontdoorsusa" and is located in this country: US. This item can be shipped to United States.